| dc.description.abstract | A highly sensitive and selective spectrophotometric method is developed for the determination of iron(III) in aqueous solution withhydroxytriazenes. In this work, the effect of pH variation, the composition of the complex of Fe3+ to hydroxytriazenes, precision, Sandell'ssensitivity and interference studies were investigated. This investigation was done under the optimum reaction conditions and otherimportant analytical parameters. Hydroxytriazenes reacts with the Fe3+ and forms coloured complexes. The Fe(III) complex is detected atλmax = 410 nm and pH range 3-4 for reagent no(i), 530 nm and 4-5 for reagent no (ii), 410 nm and 4.5 -5.5 for reagent (iii), 396 nm and 3.5-5.0 for reagent (iv), 467 nm and 2.5-3.5 for reagent no.(vi). Beer-Lambert's law is obeyed in the concentration range (1.0-5.0) × 10-5M,(1.5-9.0) × 10-5 M, (0.5-4.0) × 10-5 M, (0.3-1.8) × 10-5 M, (0.6-3.6) × 10-5 M, (2-12) × 10-5 M for nos. (i), (ii), (iii), (iv), (v), (vi)respectively. The molar ratio of Fe(III) to the hydroxytriazenes was found as 1:3. The limiting concentration for interference for 35diverse ions are reported. The standard deviation ranges between 0.019 to 0.088. The Sandell's sensitivity in ng/cm3 ranges between2.5.579 to 4.189. Reagent nos. (iii), (iv), (v), which were very sensitive were used to determine the level of iron in veg etable samples fromBaharini, Nakuru To wn and the results obtained were compared with those of atomic absorption spectrophotometer. | en_US |
